Index of /downloads

Icon  Name                    Last modified      Size  Description
[PARENTDIR] Parent Directory - [   ] IQPlatforms.pdf 2017-01-09 14:53 59K [   ] IQ_0_quicktestDAC_Di..> 2016-06-26 19:23 1.5G [   ] IQ_0_quicktestDigi.zip 2016-11-16 19:14 1.6G [   ] IQ_1_jessie_iqaudio...> 2016-08-01 20:50 620M [   ] IQ_OSMC_TGT_rbp1_201..> 2017-01-04 13:30 156M [   ] IQ_OSMC_TGT_rbp2_201..> 2017-01-04 13:30 157M [   ] IQ_RPi2_OpenELEC-RPi..> 2015-07-27 10:57 1.1G [   ] IQ_Roon_pcm5xxx_RC6...> 2017-01-05 22:00 520M [   ] IQ_Roon_wm8804_Alpha..> 2017-01-08 20:02 521M [   ] IQ_ShairPortSync.img..> 2016-06-28 16:13 670M [   ] IQ_max2play_2.34.zip 2016-08-26 17:27 1.0G [   ] IQaudIO.pdf 2016-11-20 15:48 1.6M [DIR] adverts/ 2016-11-16 19:08 - [DIR] old/ 2016-11-20 16:11 -
Welcome to the pre-configured SD card images / tools for IQaudIO products.

The following files exist:
==========================

IQ_0_quicktestDAC_DigiAMP_AMP.zip
	This is a basic quick test SD card image.(Jessie-lite based)
	On startup the amp is un-muted
	On startup volume is set to 30%
	Plays a set mp3 file at startup (see /etc/rc.local) 
	Useful to check that you have installed the IQaudio hardware correctly.
	Supports Pi-DACZero / Pi-DAC+ / Pi-DigiAMP+ and Pi-AMP+
	Suitable for Raspberry Pi Zero / A+ / B+ / RPi2 / RPi3
	NOT SUITABLE FOR THE Pi-DIGI+ (Digital output card)


IQ_0_quicktestDigi.zip
	This is a basic quick test SD card image.(Jessie-lite based)
	Plays a set mp3 file at startup (see /etc/rc.local) 
	Useful to check that you have installed the IQaudio hardware correctly.
	Supports Pi-Digi+ ONLY
	Suitable for Raspberry RPi2 / RPi3
	NOT SUITABLE FOR THE Pi-DACZero / Pi-DAC+ / Pi-DigiAMP+ or Pi-AMP+ (Analogue output cards)


IQ_1_jessie_iqaudio.img.zip
	This is 4.4.13+ Raspbian Jessie-lite, pre-configured for IQaudio Pi-DAC+
	Supports Pi-DACZero / Pi-DAC+ / Pi-DigiAMP+ and Pi-AMP+
	Suitable for Raspberry Pi Zero / A+ / B+ / RPi2 / RPi3
	NOT SUITABLE FOR THE Pi-DIGI+ (Digital output card)

	
IQ_max2play_2.34.zip
	Distribution focusing on Multi-Room audio using Squeezebox Technology
	IQaudIO card selection pre-installed
	connects from web browser at htto://max2play
	NOT SUITABLE FOR THE Pi-DIGI+ (Digital output card)


IQ_Roon_pcm5xxx_RC6.img.zip
	This is the IQaudIO RoonReady certified image
	Supports Pi-DAC+ / Pi-DACPro / Pi-DigiAMP+ and Pi-AMP+
	Suitable for Raspberry Pi A+ / B+ / RPi2 / RPi3
	NOT SUITABLE FOR THE Pi-DIGI+ (Digital output card)
	RC6 brings:
	- IQaudIO Roon RAAT is now a service, restarting automatically if it should ever fail
	- Wifi networking is supported using the boot partition’s wpa_supplicant.conf file. See /boot/README.TXT for details
	- Note, Pi-Zero is not supported but Pi-DACZero is when used with RPi2/3 etc.


IQ_Roon_wm880_Alpha2.img.zip
	This is the IQaudIO RoonReady image
	Supports Pi-Digi+ only
	Suitable for Raspberry Pi A+ / B+ / RPi2 / RPi3
	NOT SUITABLE FOR THE Pi-DAC+ / Pi-DACPro / Pi-DigiAMP+ and Pi-AMP+ (Analogue output cards)
	Alpha2 brings:
	- IQaudIO Roon RAAT is now a service, restarting automatically if it should ever fail
	- Wifi networking is supported using the boot partition’s wpa_supplicant.conf file. See /boot/README.TXT for details
	- Volume control is implemented but 0bd is bit perfect output.
	Note, Pi-Zero is not supported.


IQ_RPi2_OpenELEC-RPi2.arm-5.0.3_IQaudio.zip
	Basic OpenELEC with KODI 5.0.0 for the Pi+ / RPi2 with IQaudIO Pi-DAC+ and Pi-AMP+ support pre-configured
	SYSTEM volume set much lower not to blow your speakers up at startup
	Radio plugin pre-installed
	USE F9 and F10 to adjust volume (or + and -)
	NOTE: Requires 8GB SD cards
	Supports Pi-DAC+ / Pi-DigiAMP+ and Pi-AMP+
	Suitable for Raspberry Pi A+ / B+ / RPi2 / PRi3
	NOT SUITABLE FOR THE Pi-DIGI+ (Digital output card)


IQ_ShairPortSync.img.zip
	Preconfigured Shairport sd card image. Based on JessieLite 4.4.13+. 
	Mike Brady’s Shairport-Sync runs at startup as “IQaudIO” airplay receiver.
	Supports Pi-DACZero / Pi-DAC+ / Pi-DigiAMP+ and Pi-AMP+
	Suitable for Raspberry Pi Zero / A+ / B+ / RPi2 / RPi3
	NOT SUITABLE FOR THE Pi-DIGI+ (Digital output card)


IQ_OSMC_TGT_rbp2_20161224-iqaudio_pcm5xxx.img.zip
	This is the latest RPi2/3 Release with IQaudIO Pi-DAC+/Pi-AMP+/Pi-DigiAMP+ configured
	NOTE: Volume set to 100% at startup.
	Suitable for Raspberry RPi2 / RPi3
	NOT SUITABLE FOR THE Pi-DIGI+ (Digital output card)


IQ_OSMC_TGT_rbp1_20161224-iqaudio_pcm5xxx.img.zip
	This is the latest RPi / Pi-ZERO Release with IQaudIO Pi-DACZero configured
	NOTE: Volume set to 100% at startup.
	Suitable for Raspberry RPi2 / RPi3
	NOT SUITABLE FOR THE Pi-DIGI+ (Digital output card)


IQ_OSMC_TGT_rbp2_20161224-iqaudio_wm8804.img.zip (Coming soon)
	This is the latest RPi2/3 Release with IQaudIO Pi-DIGI+ configured
	Suitable for Raspberry RPi2 / RPi3
	NOT SUITABLE FOR THE Pi-DAC+/Pi-AMP+/Pi-DigiAMP+ (Analogue output card)



For Volumio, RuneAudio and MoodeAudio, IQaudIO support is build in and easily configured - either automatically, or from the software’s web interface. If we include a pre-configured image here for these software packages it is to remove the need for users to configure it themselves BUT the version of the pre-configured version may not be the latest.


==========================



IQaudIO.pdf
	Latest user documentation for Pi-DAC+ / Pi-DigiAMP+ / Pi-AMP+ / Pi-Digi+ / Pi-DACZero / CASE+ and Linux configuration


==========================



Please email info@iqaudio.com for further information

5/1/2017 - GG